How to sew buttons more securely?

- Apr 24, 2018-

 Have you ever encountered such a situation where buttons have lost their buttons?

 Buying clothes for a long time wearing a button may fall off, after the sewing itself also fell, the reason is that the method of sewing buttons is wrong. So how do you sew the buttons correctly?

 Prepare materials: The materials and tools needed to sew the buttons include clothing, suitable buttons, needles, a line of about 60 cm (color to match clothing), pins or needles, and scissors.

 Buttons are the most common and common button styles. They are generally used on shirts and sweaters. They usually have 2 holes and 4 holes.

1, threading the needle to cut about 60 cm long line, one end through the needle eye, the two ends of the line pinched together so that the line becomes a double stranded line, aligned after the end of a knot fixed to prevent the spread, so this knot to It is large enough so that it cannot be fixed on one side of the fabric when stitched.

2. Determine the position of the buttons. Place the cuffs on the countertops. Use a bead to pass through the middle of the buttonhole until the lower fabric. Then turn the cuffs open. The position of the bead pins is the position where the buttons should be fixed.

3, the back of the needle from the needle up close to the "marker" position, from the bottom of the fabric to the top, and then take the marker, the line tension until you feel the line on the other side of the fabric was just hit the end of the card Stay so far.

4, through the hole in the button so that the needle casually from bottom to top through any hole in the button, and then through the diagonal hole from top to bottom, and then back under the fabric, the thread will be tightened Buttons secure the fabric. Then the needle goes up through the fabric, through the first hole, through the diagonal hole, back through the back... This is repeated 2-3 times.

5, through the remaining holes using the method just passed the remaining holes.

6, winding foot fixed winding foot is not necessary. But if there are other buttons on the winding, of course, you sewn this button must also be around. Put the needle back on top of the fabric and wrap the “harness” between the underside of the button and the fabric 2-3 turns, and then put the needle under the fabric. This step can create a small space between the fabric and the button, and we are more convenient when using buttons.

7. To fix the thread head, we need to first stitch a stitch laterally at the bottom line of the clothing, but the thread is not pulled tight and it is pulled up to form a loop. Then, pass the needle through this ring, then tighten the thread as if it were a single knot. You can repeat this method 2-3 times.

custom button